| 摘要: |
| 为保证去核性能,喂料装置应单粒喂入。去核辊宜采用食品橡胶材料,直径不宜小于150mm,表面制成大齿纹可提高去核性能。慢辊转速取60r/min左右为宜,快慢转辊速比选3较佳。去核间隙应在2.0～2.5mm之间进行微调。两辊之一宜采用弹簧浮动支承,压紧弹簧的压力能根据山萸果的软硬进行调整。 |
| 关键词: 山茱萸,设计参数/去核机,单粒喂料,转速比 |
| DOI： |
| 分类号: |
| 基金项目:农业部资助项目 |
|
| A Study of Principal Working Parts and Parameters of the Core-Remover of Cornus Officinalis |
|
He Dongjian Lu Xinmin Mu Haomin Sun Li Dn Baishi Li Feixiong,He Dongjian Lu Xinmin Mu Haomin Sun Li Dn Baishi Li Feixiong,He Dongjian Lu Xinmin Mu Haomin Sun Li Dn Baishi Li Feixiong
|
| Abstract: |
| In order to ensure normal performances of core removal, the feeding device should be designed for the single-grain feeding. The core removing roller should be made of food-rubber with its diameter less than 150 mm, and the ruller's surface made in sections can improve its function of core-removal. The revolution speed of slowroller can be 60 RPM and the revolution speed ratio between fast and slow rollers shouldbe 3:1. The core-removal clearance should be fine-adjusted between 2.0-2.5 mm; and one of the two rollers should use the spring float-support, and the pressure upon the spring can be adjusted according to the softness or hardness of Cornus Officinalis. |
| Key words: Cornus officinalis,design parameter / core revomer,single-grain feeding,revolution speed ratio |
