引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2228次   下载 2603 本文二维码信息
码上扫一扫!
分享到: 微信 更多
全固态复合pH传感器的研制与应用
杨百勤1, 杜宝中2, 李向阳2
1.陕西科技大学 化学与化工学院;2.西安理工大学 应用化学系
摘要:
研制了一种可用于直接测定固体、半固体及糊状物表面和内部pH值的新型全固态复合pH传感器,并详细研究了该传感器的制备工艺、性能、测试条件和干扰物的影响。结果表明,该pH传感器内阻低、响应快、测量范围宽(pH1~13)、测量精度高、重现性好,响应斜率为(56+1.0) mV/pH,温度系数为-O.782 mV/C。除能用于与玻璃电极相同的测定领域外。还可广泛用于临床检验、食品加工、生物化工、环境监测、皮革和造纸工业、土壤普查及文物档案保护等领域pH值的直接、原位无破损测量。
关键词:  pH传感器  原位无破损测定  铱电极  裸露式Ag-AgCl参比电极
DOI:
分类号:
基金项目:国家档案局重点项目(2001-B-12)
Research of all-solid combination pH sensor and its application
Abstract:
This paper reports about a new type all-solid combination pH sensor determining directly pH value of surface and inside of solid,semi-solid and pasty mass firstly in china.It also describes in detail the technology of preparing,properties of pH determining condition,and effects of other substances.The sensor has lower inner resistance,rapid response,wide measure range(pH 1-13),high measure precision and good repeat,and its response slope is (56±1.0) mV/pH,temperature coefficient is -0.782 mV/℃.The all-solid combination pH sensor not only has the same effect as glass electrode,but also can be used in clinic test,food process,biochemical engineering,environment test,leather,paper making,soil survey,cultural relic protection and so on.
Key words:  pH sensor  in-situ and intact determining  iridium electrode  Ag-AgCl bare reference electrode