| 摘要: |
| 【目的】针对目前灌区渠道输配水计量、监测相对滞后，各种计算程序或软件具有一定的局限性等状况，开发适用于多种断面型式渠道的水力参数一体化计算程序。【方法】采用Visual Basic语言及模块化设计思想，设计并建立适合灌区灌溉用水特点，集多断面、多参数及实时性与分析性、汇总与存储性等于一体的且可在Windows 7和Vista及其更高版本环境下运行的水力参数一体化计算程序，将其在某灌区进行实际使用，并将该程序计算流量与流速仪所测流量进行了比较。【结果】成功开发了适合多种断面型式渠道水力参数的一体化计算程序，实际应用及比较结果表明，其流量计算最大相对误差为1.35%。【结论】开发的多种断面型式渠道水力参数一体化计算程序可广泛用于灌区流量、流速的实时计算及各种水量的汇总与分析中。 |
| 关键词: 断面型式 水力参数 一体化实时计算 灌区输配水 |
| DOI： |
| 分类号: |
| 基金项目:国家自然科学基金项目（50979065） |
|
| Integrative programming on hydraulic parameters calculation of channels with different section patterns |
|
|
| Abstract: |
| 【Objective】Aiming to solve the problems that the water measuring and monitoring of channel transmission and distribution are relatively lagging behind,and various calculation programs or softwares are of certain limitations at present,an integrative programming appropriate for the calculation of hydraulic parameters of channels with different section patterns is developed.【Method】Based on Visual Basic and design ideas of modularization and combined with multi-sections,multi-parameters,real-time,analyticity,summary,and storage,an integrative procedure on calculation and analysis of hydraulic parameters,which can be run in Windows 7,Vista and later versions,is devised for irrigation water characteristics.The procedure was used in an irrigation district,and the calculated flow capacity was compared with the results measured by a hydrometic propeller.【Result】An integrative programming on hydraulic parameters calculation of channels with different section patterns was successfully developed and the largest relative error was 1.35% comparing to measurement.【Conclusion】This procedure can calculate the real time capacity and velocity and summarize and analyze the water quantity in an irrigation district. |
| Key words: section pattern hydraulic parameter integrative real-time calculation water transmission and distribution in irrigation district |
