引用本文:
【打印本页】   【下载PDF全文】   查看/发表评论  下载PDF阅读器  关闭
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2180次   下载 2563 本文二维码信息
码上扫一扫!
分享到: 微信 更多
油菜籽两次撞击脱壳性能试验
郭贵生1, 吕新民1, 党革荣1
西北农林科技大学 机械与电子工程学院
摘要:
通过分析农产品物料的脱壳方法及原理,并结合油菜籽的物理机械特性,提出了油菜籽两次撞击脱壳方法。同时依据两次撞击脱壳办法设计制造了油菜籽脱壳装置,并介绍了其结构和工作原理。在此脱壳装置上进行的油菜籽脱壳试验结果表明,两次撞击法脱壳率大于75%,粉末率小于5%;随着油菜籽含水量的增加,脱壳率和粉未率降低;打板在主轴上的安装位置和打板高度均有最化值。
关键词:  两次撞击法  油菜籽  脱壳机
DOI:
分类号:
基金项目:
Study on a rapeseed huller based on two-time striking
Abstract:
On the basis of analyzing the hulling methods and principles for general agricultural crop materials,combined with physical and mechanical properties of rapeseed,a hulling method of two-time striking was developed.Hulling equipment was made according to the two-time striking principle,and the structure and principle of the equipment were introduced.Based on the equipment,test results showed that:hulling rate was more than 75% and powder rate was less than 5%.With an increase of rapeseed moisture content,hulling rate and power rate were increased.The fixed position on delivering axis and height of the striking board had the best value.
Key words:  two-time striking  rapeseed  huller